Sinuo Testing Equipment Co. , Limited
Sinuo Testing Equipment Co., Limited
Add to Cart
10kV EVSE Testing Equipment Circuit 3 Impulse Test Generator
Complied Standards & Clauses
This surge test generator conforms to IEC 62368-1:2018 clause 5.4.2, 5.5.8 and Annex D, circuit 3 of Table D.1, Annex G.10, etc., IEC 60950-1:2013 clause 7.4.2, reference 3 of table N.1, IEC60065:2014 clause 10.2, 13.3.4 a).
Equipments Overview
7-inch touch LCD interface, rich in functions, easy to operate, easy to upgrade software
Intelligent programmable high voltage power supply, built-in high voltage over voltage, over current and short circuit protection
Output intelligent detection, voltage error, no output warning
Technical Parameters
| Output voltage | 10kV (Max) ±5％ |
| Output polarity | Positive, negative, positive and negative cycle |
| Input impedance | 1KΩ,±10％ |
| Storage capacitor | 1000PF |
| Charging resistance | 15MΩ |
| Impact mode | Automatic or manual |
| Impact cycles | 1-9999 |
| Impact interval time | 3-999s(3s of which is the inherent charging time of the device) |
| Use Environment | Temperature: 15℃-35℃, relative humidity: 10% -75% |
| Power source | AC220±10％, 50/60Hz |
| Dimension | 470mm×260mm×500mm |
| Weight | 30kg |
Details
