Sinuo Testing Equipment Co. , Limited
Sinuo Testing Equipment Co., Limited
Add to Cart
IEC60884-1 Electric Vehicle Connector Terminal Mechanical 75mm Test Equipment
Complied Standards & Clauses
Conforms to IEC60884-1:2006 clause 12.2.5,clause 12.3.10 and figure 11, IEC60669-1:2007 clause 12.2.5,clause 12.3.10 and figure 10, IEC60998-2-2:2002 clause 10.105 and figure 101, UL486A-B:2009 clause 9.3.2.1,clause 9.3.2.3,clause 9.3.2.4 and table 26 and figure 6.
Product Overview
Samples and Restrictions:
Applicable to screw-type terminals, screwless terminals, and electrical connectors.
Application:
Used to evaluate whether screw-type and screwless terminals can endure the mechanical stress encountered during normal operation. It primarily assesses whether the design and structure of clamping-type terminal blocks prevent excessive damage to the wire during connection.
Test Principle:
The device utilizes a rail-guided screw mechanism. Test cycles can be preset before operation. Once the preset number is reached, the system automatically halts and triggers an audible alarm to indicate completion.
Technical Parameters
| Power Supply | AC220V,50/60Hz |
| The range of counting number | 1~9999(150 times (15 min) is by default. |
| Rate of Testing | (10±2) r/min |
| Rotating weight | 0.4~70.3kg (details refer to following table 3) |
| The rotating diameter | 75mm |
| The diameter of bushing hole (mm) | 6.5,9.5, 13,14.5,15.9,19.1,22.2,25.4,28.6, 31.8, 38.1, 44.5mm (details refer to following table 3) |
| Height(H)(mm) | 260-660mm |
| Size | 790mmX400mmX1500mm |
Details
