Sinuo Testing Equipment Co. , Limited
Sinuo Testing Equipment Co., Limited
Add to Cart
Electric vehicle charging station Cable Anchorage Pull Force and Torque Test Apparatus
Complied Standards & Clauses
It is designed and manufactured according to IEC 61851-1:2017 clause 11.6.
Equipment Overview
The weight is used to apply tension, and the weight and the torque arm realize torque. The PLC is used to control the number of tensions and the torque test time. When the number of tests or the test time is reached, the equipment automatically stops. After the test, the maximum allowable displacement of the charging gun connector cable shall not exceed the standard requirement value.
Power supply: AC220V±10%/50-60Hz, 1KW; working temperature 0-40℃, humidity 30%-90%;
Dimensions: about W1600*D600*H1450mm; weight: about 180kg
Technical Parameters
| Test content | Supply plug and/or vehicle plug cable of EV charging station tension test and torque test |
| Equipment structure schematic diagram |
Refer Schematic |
| Torque application time | 0-99H59M59S can be preset |
| Pull cycles | 1-999999 cycles, can be preset, default is 100±1 cycles |
| Pull apply | Meet 160N, 200N, 240N, 250N, 500N specifications, realized by superposition of weights |
| Torque apply | Meet 0.6N·m, 0.7N·m, 1.4N·m, 2.7N·m, 5.4N·m, 11.0N·m, 16.3N·m specifications,realized by superposition of weights |
| Torque wheel | R100mm(Ф200mm) ±0.5mm |
| Tensile frequency | 1 time/s, the actual pull time is detected by the electrical signal |
| Fixture | Universal clamp, one set |
| Drive mode | Electric |
| Power failure protection | With power-off data storage memory function |
| Control operation mode | PLC automatic control, touch screen operation |
| Weight matching selection table |  |