Sinuo Testing Equipment Co. , Limited
Sinuo Testing Equipment Co., Limited
Add to Cart
Vertical Sine Vibration Test System EV Battery Testing Equipment
Complied Standards & Clauses
Sinuo can provide you with the entire excitation and testing solution, and certify the quality of your products according to national and international standards such as GB, GJB, UL, JIS, DIN, ISO, BS, MIL, IEC and ASTM.
Equipment Overview
Vibration testing is to stimulate or impact a component or device to see how it will react in a real environment. The application range of vibration testing is extremely wide, from industrial products such as circuit boards, aircraft, ships, rockets, missiles, automobiles and household appliances.
Technical Parameters
| Vibration generator A01S12 | ||
| Rated sinusoidal thrust (Pk) | 100Kg.f peak (1000N) | |
| Rated random thrust (RMS) | 100Kg.f r.ms (1000N) @ISO5344 | |
| Impact thrust (Pk) | 200Kg.f peak (2KN) @6ms | |
| Frequency range | 1～6000Hz | |
| Maximum displacement (p-p) | 25mm (1inch) | |
| Maximum speed | 1.3m/s | |
| Maximum acceleration | Sine:60g (588 m/s2) ；Random:60g(588m/s2) | |
| Maximum load | 50 kg | |
| Moving coil diameter | Ф120 mm | |
| Dynamic weight | 1.5 kg | |
| Allowable eccentric moment | 220.N.M | |
| Fundamental Resonance Frequency (Bare table) | 4700Hz (nom.) +/- 5% | |
| Moving coil mounting screw hole | Stainless Steel Inserts of M6 . (7PCS) | |
| Vibration machine body size | 370L×460D×500H mm | |
| Weight | 140Kg | |
| Power amplifier PA103EF | ||
| Rated output power | 1KVA | |
| Signal-to-Noise Ratio | Greater than 70 dB | |
| Amplifier efficiency | Greater than 90% | |
| Amplifier weight | 15Kg | |
| Amplifier size | 430L×308D×117H mm | |
| Protection function | ●Input Over/Under Voltage ●Logic Fault ●Output Over Voltage/Current ●Control Power ●External ●Module O/T ● Shaker Temp ●Shaker Travel | |
| Electrical requirements: | ||
| Power supply | 3-phase 380V/50Hz, 15KVA | |
| Ground resistance | ≤4Ω | |
