Test principle: Configure the tension clamp, take a 1m long sample from the finished cable and weigh it. Peel off all coverings within 0.2m from both ends of the specimen and remove the insulated wire core. The central pad core including the central load-bearing core should withstand a tensile force equivalent to the mass of 300m of cable. The pulling force should be applied for 1 minute.

Usage environment: Power supply: AC220V±10%/50-60Hz 1kW , operating temperature 0-40℃, humidity 30%-90%;

Technical Parameters

Equipment dimensions	About: 500×500×1600 (mm) W×D×H
Equipment weight	100kg
Maximum test force	2000N
Test force display range	0～500kg
Test force classification	There is no binning throughout the process, and the resolution remains unchanged throughout the process.
Test force measurement accuracy	Better than ±1% of the indication value
Displacement resolution	0.01mm
Displacement measurement accuracy	Better than ±1% of the indication value
Crossbeam moving speed range	25mm/min～500mm/min stepless speed regulation, speed can be set arbitrarily
Displacement speed control accuracy	Better than ±1%
Stretch space	0～1000mm
Power supply	AC220V±10%/50-60Hz 1kW
Operating temperature	0-40℃
Humidity	30%-90%

Details

Inquiry Cart 0

1KW Elevator Cable Center Core Tensile Expansion Strength Testing Machine

Electric Vehicle Testing Equipment

EVSE Testing Equipment

EV Connector Testing Equipment

EV Battery Testing Equipment

Walk In Environmental Test Chamber

Environmental Test Chamber

Temperature Humidity Test Chamber

Water Ingress Testing Equipment

Flammability Testing Equipment

Electrical Safety Testing Equipment

1KW Elevator Cable Center Core Tensile Expansion Strength Testing Machine