Sinuo Testing Equipment Co. , Limited
Sinuo Testing Equipment Co., Limited
Add to Cart
IEC62133 Two-channel Battery Crush and Nail Penetration Test Chamber
Complied Standards & Clauses
Conforms to AIS 038 crush test in page no. 79 of 106 cl.no. 3.2, Nail penetration test in page no. 101 of 106 cl.no. 3.3.2 (a), IEC62133-2012, etc.
Product Overview
This testing machine simulates the different conditions that may occur when the battery is subjected to extrusions during the use of various power lithium battery grades. The battery is placed between an extruding plate, and the motor applies pressure to the extruded battery through the screw, and automatically returns after reaching a certain pressure. This test equipment is mainly used for the safety detection of automotive lithium batteries, power batteries, accumulators, electric vehicle batteries and other batteries. It is a set of pressure system, explosion-proof system, data acquisition system, computer control system and so on. The main body of the test equipment and the control system are isolated and operated separately to realize remote monitoring and testing, and multi-layer safety protection device can meet multiple test standards. The main components are imported, which is an essential testing equipment for battery manufacturers and research institutes.
Technical Parameters
| Maximum pressure | 1KN-150KN (adjustable) |
| System structure | Vertical pressure structure |
| Driving mode | Servo motor |
| Input voltage | 380V frequency 50 Hz |
| Extrusion stroke | 0~450mm(Extrusion fixtures are not included) |
| Extrusion accuracy | ±1% |
| Velocity condition | 1 - 15mm/s (adjustable) |
| Speed display accuracy | 0.1mm |
| Pressure display accuracy | 1N |
| Velocity error | ≤1% |
| Force error | ±1% |
| Unit conversion | Kg/N/Lb |
| Test condition | Force, displacement (deformation), voltage, one of three or a combination of three |
| Squeeze pause time | 0~99 hours 59 minutes 59 seconds, the time state can be set at will to adjust the amount of deformation cloth and automatic termination |
| Control mode | PC upper computer control system |
| Box size | W1000*D1000*H1000 mm |
| Temperature range
| Collection range: -20 ~1000℃; two-channel |
| Accuracy: ±1℃; | |
| Voltage range | Collection range: 0~100V |
|
| Acquisition accuracy: 100ms; |
| Channel: 1 channel; | |
| communication | Using R232,45 communication interface, can ensure the stability and real-time remote acquisition, with explosion-proof function |
| Safety stop switch | Has an "emergency stop" button |
| Inner box material | SUS 201# stainless steel (thickness 3.0mm reinforced and total thickness of outer box 80mm) |
| Outer box material | Cold mixed plate baking (thickness 1.5mm) |
| Box body | Adopt vertical structure |
| Smoke vent | 100mm, located above the back of the box |
| Door | Left door, observation window, cold handle door lock |
| Explosion-proof pressure relief device | With explosion-proof pressure relief function, that is, the rear of the protective box has a magnet adsorption type pressure relief door (specification: 400*400mm), when the strong air impact, the pressure relief door automatically opens to reduce the explosion impact. |
| Fire extinguishing installation | The extruded box is equipped with a fire extinguishing device. Once the battery explodes, the fire extinguishing device and system can be opened by remote control or manual. |
| Exhaust system | When the test sample produces smoke, the device can automatically exhaust the smoke through the pipe |
| Lighting installation | High brightness energy-saving lighting explosion-proof lamps are placed in the test tank to illuminate the entire test space for easy test observation |
Details
