Sinuo Testing Equipment Co. , Limited
Sinuo Testing Equipment Co., Limited
Add to Cart
Multi-Channel High-Precision Power Analyzer
Equipment Overview
1. Test channel: 1-6 channels are optional
2. Both AC and DC are used to measure AC signals as well as DC signals.
3. Support WH and AH points to meet different test requirements.
4. It Can carry out efficiency measurement, input and output synchronous measurement, single-phase input/three-phase input or three-phase input/three-phase output
Technical Parameters
| Model | SNI3500X | |
| Display method | LCD | |
| Test channel | 1-6 channel for choices | |
| Main measurement parameters | Voltage RMS Urms, DC voltage Udc, Voltage average Mean, AC voltage Uac, Current RMS Irms, DC current Idc, AC current lac, active power P, reactive power Q, apparent power S, power factor PF, phase Angle φ, voltage frequency fU, current frequency fl, positive and negative peak voltage U+pk/U-pk, positive and negative peak current I+pk/I-pk, voltage crest factor CfU, current crest factor Cfl, electric energy Wh, current integral Ah, integration time, average active power AVP, average current AVI, total distortion THD | |
| Simultaneous measurement of RMS/DC/AC | Yes | |
| AD sampling rate, data update cycle |
100kS/s 100m/200m/500m/1/2/5[S] |
|
| Full-scale crest factor | 3.0 | |
| Line filter, frequency filter | OFF or ON (Frequency is 500Hz,5.5kHz) | |
| Interface configuration (standard) | RS232/USB | |
| Input signal bandwidth, sampling frequency | DC, 0.5Hz~100kHz, 100kS/s | |
| Test function | Harmonic analysis (FFT) | Yes |
| Line filtering, frequency filtering | OFF,500Hz,5.5kHz | |
| Rated capacity | Rated range of voltage and current | 15/30/60/150/300/600[V],100m/200m/0.5/1/10/20[A] |
| Test range | Current measurement range | 0.50~9999~6000v, 0.50mA--20[A] |
| Power, power factor range | (75.0mW~12kW)*3,±(0.001~1.000) | |
| Frequency measurement range and accuracy | DC, 0.5Hz~100kHz, ±0.1%x display value | |
| Harmonic measurement | 11Hz~600Hz, 1~50times | |
| Electric energy, electric energy timing range | 0~9999MWh,999h59m59s | |
| Test accuracy (Voltage/Current/Power) |
DC: ± (0.1% of reading + 0.2% of range) 0.5Hz≤f<45Hz: ± (0.1% of reading + 0.2% of range) 45Hz≤f≤66Hz: ± (0.1% of reading + 0.1% of range) 66Hz<f≤1kHz: ± (0.1% of reading + 0.2% of range) 1kHz<f≤10kHz: ± (0.07% of reading xf+0.3% of range) 10kHz<f≤100kHz: ± (0.5% of reading + 0.5% of range) |
|