Sinuo Testing Equipment Co. , Limited
Sinuo Testing Equipment Co., Limited
Add to Cart
IEC 62196 Jointed Test Probe For Electric Vehicle Connector Test
Complied Standards & Clauses
IEC 62196-1Ed.4CDV 2020 clause 10.1.
Equipment Overview
This is a precision test finger made in accordance with many standards like IEC 62196-1Ed.4CDV 2020 clause 10.1. This probe is intended to verify the basic protection against access to hazardous parts. It is also used to verify the protection against access with a finger. This test finger probe consists of dito, finger, base and insulated handle which simulates the characteristics of the human hand. It has two movable joints, which can be curved at 90°.
Customizable: it can be used for anti-electric shock test when equipped with an alligator clip at the end of the handle, or used for enclosure protection test when open threaded hole of M6 at the end of the handle (connected with pull and push dynamometer).
Technical Parameters
| Model | SN2210-2 |
| Name | Test Probe B |
| Joint 1 | 30±0.2 mm |
| Joint 2 | 60±0.2 mm |
| Finger length | 80±0.2 mm |
| Fingertip to baffle | 180±0.2 mm |
| Cylindrical | R2±0.05 mm |
| Spherical | R4±0.05 mm |
| Fingertip cutting bevel angle | 37o 0 -10′ |
| Fingertip taper | 14 o 0 -10′ |
| Test finger diameter | Ф12 0 -0.05 |
| A-A Section diameter | Ф50 mm |
| A-A Section width | 20±0.2mm |
| Baffle diameter | Ф75±0.2 mm |
| Baffle thickness | 5±0.5 mm |
| Applied standard | IEC 61032, IEC60529-1, etc. |
Details:
